Delta-electronics RTU-DNET Uživatelský manuál Strana 25

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 41
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 24
DeviceNet Remote I/O Communication Module RTU-DNET
DVP-PLC Application Manual
23
(2) Select “Setup” => “Communication Setting” => “System Channel”, and the “Serial Port Setting” dialog box
will appear.
(3) Set up the communication parameters in the PC and DVP-SV, e.g. the communication port, address, baud
rate and communication format.
Item Function Default
COM Port
COM port on the PC to be used to communicate with
DVP-SV
COM1
Address Communication address of DVP-SV 01
Baud rate Communication speed between the PC and DVP-SV 9,600 (bps)
Data Bits 7
Parity Even Parity
Stop Bit
Communication protocol between the PC and DVP-SV
1
Mode Communication mode between the PC and DVP-SV ASCII
(4) Click on “OK” and return to the main page.
(5) Select “Network” => “Online”, and the “Select Communication Channel” dialog box will appear.
Zobrazit stránku 24
1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 40 41

Komentáře k této Příručce

Žádné komentáře