Delta Electronics Network Device VFD-S Specifikace stáhnout pdf (Strana 36)

VFD-S Series

5-19

! Function Explanations:

d 0 Not Used.

d 1 AC drive operational: the output terminal will be activated when the drive is running.

d 2 Maximum Output Frequency Attained: the output will be activated when the AC drive

attains Maximum Output Frequency.

d 3 Zero speed: the output will be activated when Command Frequency is lower than the

Minimum Output Frequency.

d 4 Over-Torque Detection: the output will be activated as long as the over-torque is

detected. Pr.6-04 determines the Over-Torque detection level.

d 5 Base-Block (B.B.) Indication: the output will be activated when the output of the AC

drive is shut off by external Baseblock.

d 6

Low Voltage Indication:

the output will be activated when low voltage is detected.

d 7 AC Drive Operation Mode: the output will be activated when the operation of the AC

drive is controlled by External Control Terminals.

d 8 Fault Indication: the output will be activated when faults occur (oc, ov, oH, oL, oL1, EF,

cF3, HPF, ocA, ocd, ocn, GF).

d 9 Desired Frequency Attained: the output will be activated when the desired frequency

(Pr.3-02)is attained.

d10 PLC Program Running: the output will be activated when the PLC program is running.

d11 PLC Program Step Completed: the output will be activated for 0.5 sec. when each

multi-step speed is attained.

d12 PLC Program completed: the output will be activated for 0.5 sec. when the PLC

program cycle has completed.

d13 PLC Program Operation Paused: the output will be activated when PLC operation is

paused.

d14 Terminal Count Value Attained: counter reaches Terminal Count Value.

d15 Preliminary Count Value Attained: counter reaches Preliminary Count Value.

d16 Ready State Indicator.

d17 FWD command indication: When AC drive receives the command of forward

running, it will output immediately no matter AC drive is in the state of run or stop.

d18 REV command indication: When AC drive receives the command of reverse

running, it will output immediately no matter AC drive is in the state of run or stop.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 129 130

Žádné komentáře

Delta Electronics Network Device VFD-S Specifikace Strana 36